Reach your hand to the back of the unit, just above the Rear cover (Duplex Unit), and lift up the center of the Paper Support.
Tilt the Paper Support forward, then tilt it backward so that the Paper Support is fixed in the right position.
Pinch the Paper Support Bar at the rectangular cutout on the right of the Paper Support, and rotate it upward.
Slide the paper guide to left side.
Insert the paper into the paper support. You can load up to 60 plain paper sheets (20lb. or 75 g/m2). Slide the paper guide firmly against the edge of the paper.
Open the paper exit tray and exit tray extender.
Note(s) Loading Envelopes
Insert the envelopes into the paper support. You can load up to 5 envelopes. Place the envelopes with the non-printed side facing forward in the paper support and the flap to the left side.
Do not reverse the direction to load envelopes.
Loading Pre-printed Material
If you would like to print on an input sheet (for example, forms or stationery), place the input sheet with the non-printed side facing forward in the paper support.
CAUTION Forms from a Laser Printer!
Forms that have been printed out by a laser printer are not suitable for further printing.
Do not pull out the paper support swiftly, otherwise the tray may fall resulting in injury.
Make sure the inserted paper format and paper type matches the printer settings. Refer to Printer settings for Windows or Printer settings for Mac.
Hi Tech-Video Gallery
Thank you for submitting request. A relevant support
representative will be in touch with you per your preferred date & time
Thank you for providing details. A relevant support representative will be in touch with you during office hours
Our office hours are 08:00 AM EST to 07:00 PM EST. You may provide your details, a relevant support representative will be in touch with you.